black river usa

laser alignment for rotating machinery (serving the east coast, mid west and new england)

  1. New installations – bases, grout, piping, and soft foot almost always introduce misalignment

  2. During outages or turnarounds – equipment is disturbed, piping relaxes, and foundations move

  3. After new or modified piping runs – pipe strain can pull machines out of alignment

  4. Following maintenance work – bearing, seal, coupling, motor, or gearbox replacement

  5. After foundation or grout work – settling and curing change machine position

  6. When vibration, heat, or seal/bearing failures occur – classic symptoms of misalignment

  7. After thermal growth studies or operating condition changes – hot vs. cold alignment shifts

  8. Post-relocation or repositioning of equipment – even small moves matter

  9. After coupling changes – different couplings tolerate alignment differently

WHEN TO HAVE LASER ALIGNMENTS DONE

benefits of laser alignments

Reduces vibration and wear on bearings, seals, and couplings, extending equipment life

Improves energy efficiency by minimizing friction and power loss

Cuts unplanned downtime by preventing premature failures

Faster and more accurate than dial indicators or straightedge methods, saving labor time

  • “We run tight outages and I don’t have patience for rework. These guys showed up ready, aligned everything with lasers, and stayed inside the outage window. Startup was clean — no excessive vibration, no callbacks, no surprises. That’s exactly how outage work is supposed to go.”

    Mark Ellison – Plant Manager, Chemical Processing Facility

  • “Before laser alignment, we accepted bearing and seal failures as part of operating costs. After resetting and laser aligning our motors — especially on new installs — those failures dropped off fast. Power draw improved, vibration came down, and maintenance spend followed. From an ownership standpoint, this was one of the highest-ROI maintenance decisions we’ve made.”

    David R. Holloway – Asset Owner / Managing Partner, Industrial Operations Group

  • “I’ve seen plenty of ‘alignment jobs’ done with straightedges and hope. This wasn’t that. They corrected soft foot, dealt with pipe strain, documented everything, and explained what they were seeing as they worked. On both new installs and planned outages, the equipment ran smoother right away.”

    Luis Mendoza – Facilities & Maintenance Manager, Power Generation Site

Let’s Work Together

If you're interested in working with us, complete the form with a few details about your project. We'll review your message and get back to you shortly.